Cromar Building Products

  • Increase font size
  • Default font size
  • Decrease font size


ALLWEATHER ROOFING COMPOUND
View Full-Size Image

ALLWEATHER ROOFING COMPOUND



Ask a question about this product
Download Datasheetpdf
A bituminous solution for overall waterproofing of roofs which can be applied on to dry surfaces all year round. For the waterproofing of most types of surfaces to include galvanized steel, iron, lead, zinc, asbestos cement, asphalt and bituminous roof coatings. Moderate surface cracking to felt and asphalt surfaces may be filled with Trowel Mastic. Badly cracked surfaces should be covered with a layer of roofing felt bedded in Roofing Felt Adhesive. Stir the container thoroughly before use.  Allweather Roofing Compound may be applied by brush.  Do not apply in wet weather or when poor drying conditions exist. Do not coat rooflights, windows, glass or translucent sheets as they will constitute a hidden hazard.  Apply two coats of Allweather Roofing at a rate of 1-1.5m2 per litre allowing the first coat to dry before application of the second coat.  On overlaps of roofing sheet materials and slates subject to flexing, a glass membrane treatment bridging overlaps is recommended.  The membrane should be bedded into the first coat of Allweather Roofing Compound whilst it is still wet.
Sizes:
2.5
5.0
25.0




Recently Viewed Products

Last Updated: Tuesday, 07 February 2012 05:38
English Arabic Chinese (Simplified) Dutch French German Italian Polish Spanish
cromar-pdf-brochure
flash-brochure

Cromar Building Products Limited. Manufacturers and suppliers of building products.
Unit3 The Maltings Industrial Estate, Whitley Bridge DN14 0HH T: 01977 663 133 F: 01977 662 186